The development of technology has made copper busbar bending machines widely used. Its main function is to bend raw materials to produce copper busbars that meet requirements. Over time, malfunctions are bound to occur, so daily maintenance is crucial. So how should the bending station of a copper busbar bending machine be maintained in daily life to extend its service life? TodayCopper bus manufacturerHere we briefly introduce the maintenance and care of the bending station of the copper busbar bending machine.

First of all, when the copper busbar bending machine performs the bending work on raw materials, the center position of the raw material to be bent must be aligned with the 0-degree mark on the scale of the bending station of the copper busbar processing machine. If bending starts without alignment, the bending accuracy will be seriously affected.

Secondly, when the busbar bending machine is used for bending work on certain special materials, it is necessary to know what the bending angle of the material is. Since many materials can only be bent to 90°, if this angle is exceeded, the material will be damaged, making it very easy to break.

Then, after the copper busbar bending machine completes a series of bending operations, check whether the bending machine’s head is bent. If it is bent, adjust it in time or replace it with a new one.

By reading the above content, we can understand that the central position of the raw material should be aligned with zero degrees, determine the bending angle for each type of material, and after completing the bending operation, check whether the blade of the busbar bending machine is bent. In addition, the oil level in the tank should be checked weekly, and it should also be checked after stopping maintenance of the hydraulic system; if the oil level is below the oil window, hydraulic oil should be added. Every time the oil is changed, the oil tank should be cleaned; the system oil temperature should be between 35°C and 60°C.