What issues should be noted during the processing of copper busbars? Yixing Xindake will introduce them to you!

When marking the copper busbar, lines should be drawn reasonably according to the position of the holes to reduce unnecessary markings; pay attention to the pressure applied by your hands to avoid scratches on the surface of the busbar. Carefully check the dimensions and hole sizes indicated on the drawing. When feeding the busbar into the processing machine, we should follow the specifications required by the machine. Before cutting, use a caliper to measure the width and thickness of the copper busbar. Only proceed with cutting once it meets the requirements. Arrange the cut busbars neatly to avoid scratches.

When copper busbars need tapping, it is necessary to determine whether the diameter of the pilot hole meets the requirements, and then select the corresponding tap. When drilling, the size of the hole in the copper busbar should be clearly observed, and a drill bit of the corresponding size should be used; after drilling the copper busbar, it should be arranged neatly. The specifications of the inserts pressed into the copper busbar by the processing machine and which surface of the busbar they are pressed onto should be noted; choose the appropriate pressure on the riveting machine to avoid damaging the busbar by excessive force. The riveting machine or the surface of the busbar needs protection to prevent scratches or dents. The busbar should use corresponding molds according to different thicknesses. After adjusting the molds, a test should be done with scrap material to avoid producing defective products. After bending, operators should perform self-inspection, and after confirming it is qualified, the inspector should carry out further inspection.

Yixing Xindake reminds: Employees should not wear gloves when drilling, and a certain distance should be maintained between the hands and the drill bit to ensure personal safety. If you want copper busbars in Wuxi, it would be Yixing Xindake New Energy Technology Co., Ltd. Our company specializes in copper foil flexible connectors, copper busbar manufacturing, stamping part processing prices, and more. Thank you for your browsing and support!