What should be done if copper becomes scrap? Wouldn't it be too wasteful to throw it away? Shouldn't you consider recycling it?Yixing Copper Busbar ManufacturerTell you how to turn scrap copper into copper rods!

Various scrap copper materials are smelted into 255 mm ingots, and then forged by extruders and drawing machines into newly formed smooth copper rods only 17 mm thick. They look neatThe finished products placed on the shelves, this is a production line that turns decay into magic.In the workshop, several forklifts are transporting finished products that have passed inspection to the shipping area. This is a digital warehouse where finished goods can be delivered by forklift simply by scanning a codeOn the corresponding shelf. It is understood that before the finished products are packaged, the appearance is inspected manually. Upon arriving at the inspection area, female workers check on the inspection platform whether the surface of these copper rodsSmooth, straight, clean, and free of cracks, etc. Qualified ones are then subject to a second selection by female workers in the packaging area. To outsiders, straight copper rods make it very difficult to spot any problems.But the quality inspector only needed to turn and look to know if it was qualified. While we watched from the side, the female worker was skillfully picking out copper rods。

How did the initially thick copper ingots transform into tiny copper rods? The reporter arrived at the extrusion area, where yellow ingots with a diameter of 255 millimeters were heated by gas and electricityThe stove's high-temperature heating became dark red and translucent; even with a fan, you could still feel the heat. On the nearby workbench, several empty bottles of mineral water were displayed,The operator's face was covered in sweat, and only by constantly replenishing water could he withstand the high temperature. Standing on the platform, he saw these glowing red ingots being squeezed through the press.Under pressure, it quickly turned into a thin copper strip wound around the coiling machine. For production needs, these ingots need to be extruded into coiled materials of different thicknesses, which requiresDifferent sizes of molds are needed. These molds have extremely high temperatures, and workers need specialized tools for cleaning and installation. Each ingot needs to be handled by workers after passing through the extruder.The round holes on the mold are cleaned one by one. Workers are in close contact with high-temperature molds; this position is the most laborious.

The coil material must be straightened and cut by the drawing machine to complete its transformation. On this day, all four pullers were running, each with a clear production missionWork orders. These drawing machines are all operated by young guys, and one by one, the copper rods roll down from the gears. They can be transported by forklift to the inspection platform for testing.Ultimately, high-quality finished products are produced and shipped to customers across the country.

The above is the content compiled and sent to you by the editor. I hope it is helpful to you. If you want Wuxi copper busbars, then it is Yixing Xindake New Energy Technology Co., Ltd.Managed, our company specializes in copper foil flexible connectors, copper busbar manufacturing, and stamping parts processing prices. Thank you for your browsing and support!