When you were a child in the '80s and '90s, did you secretly turn on the TV during thunderstorms and lightning? Were you ever warned by your parents not to turn on the TV during thunderstorms and lightning? Why were you warned? Mainly because turning on the TV during thunderstorms and lightning could blow the TV's fuse. Do you know what a fuse is? It's actually just a copper flexible connector.

Comprehensive and comprehensive basic lightning protection measures: The main basic lightning protection measures are as follows.

1. Cotton roll: The internal structural components of various metals, including antennas, lighting fixtures, billboards, decorations, structures, and senior networks, such as welding, to ensure that in this system, potentials, people at the same potential, and no electric shocks.

2. Conduction: The four corners of the building's roof use lightning rods and a lightning mesh, connected by conductors to circular underground paths that lead to the embedded underground lightning mesh. High-end lightning attractors, lightning rods, conduct powerful lightning currents to the ground.

3. Diversion: From external sources to the conductor, including power lines, telephone lines, and signal lines, parallel surge protectors are connected to the ground, placing overvoltage along the wire, and protecting the computer room equipment and staff through the short access of the surge protector.

4. Grounding: Lightning energy leaks to the ground.

5. Shielding: Surrounded by metal mesh, foil, and shell-and-tube conductors to form a "Faraday cage," it blocks the electromagnetic field of lightning pulses.

The appearance of red copper is reddish-purple, and it has very high electrical and thermal conductivity, good corrosion resistance, and ease of processing. Therefore, depending on different uses, it is often processed into sheets, strips, foils, tubes, rods, wires, coils, special-shaped copper materials, and copper castings. T2 red copper sheets belong to copper sheet materials. Copper sheets are further divided into hot-rolled plates and cold-rolled plates. The thickness of hot-rolled plates is generally between 4 and 25 mm, while cold-rolled plates range from 0.2 mm to 15 mm, with a maximum width of 2500 mm and a maximum length of 6000 mm. The thickness of red copper sheets can reach up to 50 mm.

In addition to fuses used in many electrical appliances, copper flexible connectors can also be found at some cable joints. If you want copper foil flexible connectors, it would be Yixing Xindake New Energy Technology Co., Ltd. Our company specializes in copper foil flexible connectors, copper busbar manufacturers, and the processing prices of stamping parts. Thank you for your browsing and support!