You must be rightStamping part processing priceThe quotation is not very clear. Below, we will mainly introduce the method of quoting processing fees for stamped parts, so that everyone can have a clear idea.

In mechanical processing production, quoting is one of the very important tasks aside from production. A company engages in production mainly to make a profit, and to make a profit, it is necessary to strictly control the production process. In addition to this, quoting is also an essential task. Only scientific quoting combined with high-quality products can enable a company to achieve good benefits.

1. Development Evaluation

Regardless of the type of processing quote being made, it is necessary to conduct a development evaluation before providing the quote. This is one of the essential steps. Development evaluation includes: positioning of stamped parts, estimated production volume, and technical feasibility. It also covers whether technical requirements can be met, whether quality can be ensured, availability of materials and outsourced parts, whether existing equipment will be used or new equipment needs to be purchased, and whether the current company's production capacity and manpower are sufficient. The results of the evaluation are used to decide whether to proceed with the development project.

2. Quotation details for stamped parts

The quotation for stamped parts mainly involves the following aspects:

Material costs, profile mold costs, stamping mold costs, fixture costs, stamping costs, machining costs (such as CNC machining, etc.), surface treatment (such as oxidation, painting, silk-screen printing, spraying, surface galvanizing, etc.)

3. Stamped parts quoted by item

(1) Material Cost: Unfold the parts and calculate the developed length of the parts; then use the calculation formula L (mm) × W (mm) × H (mm) × (g/cm) × unit price (yuan/Kg) × (1.1-1.2) / 10 to calculate the material cost.

(2) Stamping die cost: Estimate the area of the male and female dies of the stamping die based on the shape of the part, with a single-side allowance of 125px, a height allowance of 3-125px, and refer to the die set standard according to the die size.

(3) Stamping fee: calculated according to tonnage. (0.8-1) yuan/60 tons, 1.2 yuan/80 tons

(4) Fixture fees

(5) Machining costs

(6) Surface treatment cost: Oxidation 0.6 yuan/decimeter; Painting; Screen printing; Spraying; Surface galvanizing.

(7) Gross margin: controlled between 20-30%.

4. Stamping processing fee quotation

(1) Confirm the price of the raw product. For the first set of cut materials, measure the material width, pitch, and thickness to determine the weight of the raw product. Based on the market selling price of this type of material, calculate quietly to obtain the material cost of the product.

(2) Confirm the stamping fee. A product consists of multiple processes, and each process may use a press of different tonnage. The general price for one stamping machine of different tonnage is as follows:

16T——0.06 yuan, 25T——0.08 yuan, 35T——0.1 yuan, 45T——-0.12 yuan, 60T——-0.15 yuan, 80T——0.2 yuan, 110T——0.25 yuan, 160T——0.30 yuan, 200T——0.50 yuan, 200T (double shaft)——0.60 yuan, 250T (double shaft)——0.90 yuan.

(3) Total price = material cost plus stamping fee for each tonnage. However, when making a formal quotation, attention must be paid to the high scrap rate during production. In addition, post-processing, electroplating, brushing after product production, as well as screws and studs, all need to be included in the calculation.

The stamped parts are characterized by dimensional accuracy, low consumption, and undamaged surfaces. Yixing Xindake New Energy Technology Co., Ltd., as a professional copper busbar manufacturer, has long been providing copper foil flexible connectors, stamped parts processing, nickel strips, and other high and low voltage accessories at reasonable prices. Thank you for your browsing and support!