Stamped partsIt is also used in automobiles and is a widely used type of part in cars. Do you know what common problems automotive stamped parts have?

Automobile stamped parts occupy a large proportion in cars. Since they are mainly used in automobiles and the main manufacturing process is stamping, they are therefore called autoStamped parts. Next, let's go through specific study and understanding to achieve the expected learning objectives.

1. If there is material stacking or cracking on automotive stamped parts, what are the causes?

For automotive stamped parts, if a layering phenomenon occurs, the specific reason is either that the gap of the pressing surface is too large, or that the air cushion pressure is too low. It is also possible thatUnreasonable surface shape, etc. As for cracking in stamped parts, there are many causes, but the main ones are poor flow of the sheet material and deformation of the shape, resulting from this.

2. Is there a difference between molds in automotive stamping parts and molds on hardware stamping parts? Additionally, what exactly does FLUSH refer to in automotive stamping inspection tool measurement?

The molds used in automotive stamped parts and the molds used in hardware stamped parts, although both belong to the general category of molds, when compared specifically, there are still...It is different. Because the former is generally related to the technical requirements of surface A, while the latter is not. In the measurement of automotive stamping fixtures, FLUSH, specifically speaking,refers to the alignment inspection of stamped parts.

3. For automotive stamped parts, during inspection, can all defects be visually identified?

The answer to this question is negative, because this method of inspection, or judging by feel, is only useful for certain defects, and notIt applies to all problems. For example, the cracking of automotive stamped parts can be seen by visual inspection.

The raising of the above questions, as well as the correct answers provided, I hope everyone can take seriously and engage with, so that one can grasp them in a timely manner, and at the same time, increase one's own...Amount of knowledge in the field. Moreover, if the above content is well applied in practice, it can also improve the performance for automotive stampings.Fruits, as well as their utilitarian value.

The above is the content compiled and shared by the editor for you. I hope it is helpful to you. If you want copper foil flexible connectors in Wuxi, then it would be Yixing Xindake New Energy Technology Co., Ltd. Our company specializes in copper foil flexible connectors, copper busbar manufacturing, and stamping parts processing prices. Thank you for your browsing and support!