The quality of stamped parts may be related to many factors, because the influence of these factors is what causes the produced stamped parts to fail to meet standards and be scrapped. This can bring huge losses to the enterprise. Therefore, the reasons why stamped parts become defective should be identified and effectively prevented to improve the product pass rate. Today, let'sStamping part processing priceLet's make a simple analysis for you!

There are many reasons for the production of defective stamped parts. It may be due to the poor quality of the raw materials for the stamped parts; it may also be related to the stamping die used for production, such as improper installation, adjustment, and use of the die; the die may experience gap changes due to long-term use, or wear of its working and guiding components; the die may also undergo relative movement at various installation positions due to prolonged impact and vibration, causing fasteners to loosen.

In addition, the production of defective stamped parts may also be caused by operator errors, such as the operator not feeding the strip material in the correct way or not following the operating procedures, and so on. What are the preventive measures for these causes?

In order to ensure the qualification rate of stamped parts, the raw materials must comply with the specified technical conditions. To achieve this, it is necessary to strictly inspect the specifications and grades of the raw materials, and, where possible, to conduct assay inspections on workpieces with high requirements for dimensional accuracy and surface quality.

Moreover, every stage specified in the stamping production process regulations should be fully and strictly adhered to; the presses, stamping dies, and other tooling equipment used should be ensured to operate in normal working condition; a strict inspection system should be established as much as possible during production to detect product issues promptly and accurately.

That is all for the introduction to the pass rate of stamped parts. Have you learned anything? Yixing Xindake New Energy Technology Co., Ltd. is located by the beautiful Taihu Lake, with convenient transportation and relatively favorable stamping part processing prices. It is a professional copper busbar manufacturer producing copper foil flexible connectors, stamping parts, and other high and low voltage accessories. We look forward to cooperating with you!