Stamped partsAre processing costs related to production efficiency and product quality? The stamping technicians at Wuxi Xindake have relatively high production efficiency, and the operation is also very convenient. The processing of these stamped parts is easy to mechanize and automate, all because stamping relies on dies and stamping equipment for processing. The stroke frequency of an ordinary press can reach several dozen times per minute, while a high-speed press can reach several hundred or even over a thousand strokes per minute, and each stamping stroke can produce a stamped part.

During the stamping process, the outer surface of the workpiece only comes into contact with the pressure fluid. The pressurization process is relatively gentle, so the forming of the stamped part is uniform, enabling a uniform pressure distribution and achieving a much smoother outer surface; importantly, it can also shorten processing time and allow for mass production.

Of course, before producing stamped parts, it is necessary to conduct a comprehensive and detailed inspection of the materials to ensure they meet production conditions, so as to avoid problems from being carried over into the workpieces. Based on previous experience, the selection of materials for stamped parts should take into account grade, thickness, specifications, and dimensions. Only by selecting reasonable sheets is it possible to process high-quality stamped parts.

When selecting a processing factory for stamped parts, attention should also be paid to the design of the stamped parts. The drawings must be strictly approved according to the prescribed procedures and must comply with relevant industry standards; the precision of the stamped parts; as well as the technical requirements of the stamped parts and molds. The molds must also be manufactured according to the approved drawings. Only in this way can product quality be improved and the service life of the molds be extended.

Considering the importance and uniqueness of stamped parts, whether during production or storage, it is crucial to ensure their functionality is intact. Therefore, a good approach is to place them in a sealed box or a relatively enclosed space, so that they are subjected to fewer influencing factors, ensuring the product is adequately protected.

In addition to the traditional use of presses and steel molds to manufacture stamped parts, various special stamping forming processes such as hydraulic forming, spinning forming, superplastic forming, explosive forming, electrohydraulic forming, and electromagnetic forming have also rapidly developed, raising the technical level of stamping to a new height.

There are many materials for stamping machines. For example, our company's hardware stamping parts, compared to other workpieces, have the characteristics of being lightweight, thin in thickness, and having good rigidity. Their dimensional tolerances are ensured by the molds, so the quality is stable and generally can be used without further mechanical cutting.